How to measure for a stainless backsplash
Measure the space, not the old backsplash.
- Width: measure the opening side to side at the top, the middle and the bottom. Walls and cabinets are rarely parallel. Use the smallest number.
- Height: measure from the counter or the top of the range to the underside of the hood or cabinets, at both ends. Use the smallest number.
- Take a little off each so the panel goes in without forcing: a sixteenth to an eighth of an inch is typical.
- Outlets and switches: measure from the left edge of the space to the left side of the box, and from the bottom to the bottom of the box, then the box's width and height. Those are the numbers the cutout asks for.
- Decide how it is fixed: screws through holes at the corners, or construction adhesive on a flat wall.
Enter the width as the length and the height as the width, place the cutouts by tapping the panel, and check the picture against your wall before you order. The panel is made exactly as drawn.
Make one
Guides | Shipping and returns | Terms | Privacy | Contact